ArtWorks Resin® Calculator

Easily enter the length and width of your resin substrate to get the amount of resin needed to cover an 1/8" layer. Extra may be needed for covering sides.

Enter measurements in inches/centimeters and choose the corresponding measurement unit with the "Measured in" drop down menu.

Value shown represents total amount suggested.  Use 50% resin, 50% hardener, measured by VOLUME (not weight) in a measuring cup or marked cup.  ArtWorks resin can NOT be measured by weight (as part A is heavier then part B).

40458280_2166557363592192_84223063391742

Liquid Diamonds Casting Resin Calculator

Liquid Diamonds Casting Resin is a 2:1 ratio.

Value shown represents total resin suggested.  Remember to use twice the amount of resin to hardener.  We recommend measuring Liquid Diamonds by weight or volume.

* measurements in inches/ounces only

Liquid Diamond Resin Logo.jpg

Credits: 

Image%2024-7-20%20at%209_edited.jpg