Liquid Diamonds Casting Resin is a two-part epoxy resin system with a 2:1 ratio.  It is designed for use in molds, casting, jewellery, pen making, custom knifes, crafts & more


• Mixing Ratio 2:1 (by weight)

• FDA Compliant

• No VOCs

• No bad odours

• UV resistant

• Extremely low viscosity (almost like water)

• Low to zero bubbles when casting

• Pot life: 45 - 55 mins at 150g

• Cures to demold in about 10 - 12 hours

• Full cure within 24 hours (for machine/sanding works)

• Heat resistant up to 120°C / 248°F (after 3 weeks full cure)

• Cures very rigid and rock hard

• Cures crystal clear like glass

• High gloss finish

• Low exotherm (heat) applied to your artworks

• Shelf life: 6 months after opening

• Appropriate for small to deep castings up to 2cm thick

• Pressure or vacuum chamber not required.


Contents: 96 oz (approx. 2720g)

Liquid Diamonds Casting Resin 96 oz Kit

  • Liquid Diamonds Casting Resin should be measured in ratio 2:1 by weight.

    • Please refer to Liquid Diamonds Casting Resin's application here.
    • Please read our Resin Safety Tips here before using the resins.


    Please note that bottles are filled by weight not volume and will not be filled right to the top.


Store Policies & Disclaimer  |   Privacy Policy   |   Terms & Conditions

  • Instagram
  • Facebook
  • Pinterest

©2020 Resinous Art Studio.  All Rights Reserved.