Liquid Diamonds Casting Resin is a two-part epoxy resin system with a 2:1 ratio.  It is designed for use in molds, casting, jewellery, pen making, custom knifes, crafts & more.

 

• Mixing Ratio 2:1 (by weight)

• FDA Compliant

• No VOCs

• No bad odours

• UV resistant

• Extremely low viscosity (almost like water)

• Low to zero bubbles when casting

• Pot life: 45 - 55 mins at 150g

• Cures to demold in about 10 - 12 hours

• Full cure within 24 hours (for machine/sanding works)

• Heat resistant up to 120°C / 248°F (after 3 weeks full cure)

• Cures very rigid and rock hard

• Cures crystal clear like glass

• High gloss finish

• Low exotherm (heat) applied to your artworks

• Shelf life: 6 months after opening

• Appropriate for small to deep castings up to 2cm thick

• Pressure or vacuum chamber not required.

 

Contents: 12 oz (approx. 340g)

Liquid Diamonds Casting Resin 12 oz Kit

SKU: LD12
S$49.00Price
  • Liquid Diamonds Casting Resin should be measured in ratio 2:1 by weight.

    • Please refer to Liquid Diamonds Casting Resin's application here.
    • Please read our Resin Safety Tips here before using the resins.

     

    Please note that bottles are filled by weight not volume and will not be filled right to the top.